Absolute NEW 2018!

Polyolefins – Curved panels variable radius

Medacciai curved radius panels are also available in polyolefins!

Metal panel for straight or curved roofing with variable radius, consisting of a galvanized flat external sheet, pre-coupled with a synthetic membrane in TPO Polyolefin or PVC, from a corrugated galvanized steel sheet and pre-painted, having a thickness of 0.4 to 0.8 mm (according to request and availability), and by an insulating material interposed between the sheets in expanded polystyrene EPS White or Graphite, having thickness from 40 to 200mm. The use of a flat or corrugated outer layer, in TPO Polyolefin or PVC with selvage or with a separate band to weld, allows the panel to be used in situations where the slope or other technical-climatic conditions do not allow the use of a traditional panel. Also available with intrados in pre-laminated sheet metal with synthetic roof in TPO Polyolefin or PVC.

Pannelli curvi a raggio variabile Poliolefine

DIMENSIONAL CHARACTERISTICS

  • Greek height mm. 27.5
  • Useful pitch mm.905 +/- 5mm.
  • Greek wheelbase mm.113
  • Material quality according to standards:
    EN 10346 – EN 10169-93
    Std length up to 8.3 m
    Longer lengths on request

SCOPRI I PANNELLI CURVI COIBENTATI IN POLIOLEFINE  SUL NOSTRO CATALOGO